Price: $24.69

Quantity in stock: 31572

Seller rating: rated 4.9 out of 5  (5604 Customer Ratings)

Cheetah Mounts APTMMB Tilt Wall Mount for 32"-55" Plasma and LCD Displays

rated 4.5 out of 5  (184 Customer Reviews)


List Price: $99.99
Your Price: $24.69  -- saving you 75 percent

Usually ships in 1-2 business days


Product Description
The APTMM tilt mount features a universal design that fits most LED/LCD/Plasma displays from 32 to 55". Specifically, the APTMM supports hole patterns up to 27.7" horizontally by 19" vertically as well as VESA hole patterns up to 600x400mm. The APTMM is designed with a slim 1.9" profile as well as 15 degrees of downward tilt depending upon the size of your TV. The APTMM is constructed with 8LBS of 100% High Grade Steel providing a sturdy and reliable mount. The APTMM solid wall plate allows for quick and easy installation and will support installation to studs up to 28" apart (most homes are constructed with either 16" or 24" wood studs).

Technical Details
  • Universal Design Fits Most 32-55inch TVs and holds up to 165lbs
  • Flat 1.9" Profile and 15of Forward Tilt
  • Free 6" 3-Axis Magnetic Bubble Level
  • Supports up to 165LBS
  • All Installation Hardware Included
  • Special features: Hole Pattern Coverage:28" Horizontal by 19" Vertical or VESA 100x100, 200x200, 300x300, 400x400, and 400X600 + Unit Weight: Net: 8LBS Gross: 9 LBS + Unit Materials: Arms, Wall Plate: 100% High Grade Steel + Tilt Range: 0-15 Downward + Wall Plate Screw Slots: 1.5" Wide by 0.5" Apart + Profile From Wall: 1.9" + Openings for Cable Pass-Through (cable Management): Two 11.5" by 4.6" Openings + TV Arm Dimensions: 20" x 1.75" + Wall Plate Dimensions: 30" Horizontal by 9.5" Vertical

Product Details

Weight: 9.00 pounds

Model: APTMMB Universal Tilt Wall Mount

Manufacturer: Cheetah Mounts

Model SKU: B000VCTQZ2


Customer Reviews

rated 5 out of 5 Great TV Mount
by Maria , 2010-07-26


The mount was installed weeks ago and it is holding steady. It was also a great buy!



rated 4 out of 5 Good quality and price
by User1234 , 2010-07-25


I have installed this mount for a week now and it works as designed. I used wall studs to install it without any issue. I had to send the original shipment back due to some deffect, but the second one I received was fine.



rated 3 out of 5 Not quite level
by KingWings , 2010-07-25


Using the built in level I made sure the mount was perfectly level before putting it up. I used a few 1" screws to hold it in place and make sure it stayed level. I rechecked using the free level they included. Then I drilled the 4 holes and installed the lag bolts to tighten it down. I checked it again and it still showed level. I put the TV on and it was slightly, though obviously, not level anymore. I confirmed it with the level placed on the mount, then took the TV off and checked the mount again. The mount again checked level. I removed the mount, adjusted it so it was deliberately not level in the opposite direction. Then I put the TV back on and it still ended up slightly unlevel in the same direction as before but it was no longer noticeable so I left it alone. It saved me a ton of money over what I originally was going to buy and all the extra hardware just about guarantee's you have what you need.



rated 4 out of 5 bang for you buck
by fwarden , 2010-07-19


Just put this up this past weekend. Have not had any dealings with customers service so can not rate them. For the money you can not go wrong with this mount. Any idiot with a drill, make sure you have actually used the drill before, can hang this mount on the wall. Just find two studs and use the hardware that comes in the package, didn't even have to make a trip to the Hardware store. I have a 46" Mitz. and the mount holds it very sturdy. One word of advise, don't trust the levels that come with it. It is a nice jesture but they are not accurate. Use one of your own. If you don't own a level....have someone other than yourself hang the mount.



rated 4 out of 5 Excellent Mount - Beware the built-in level
by Michael P. Guentzel from Round Rock, TX USA, 2010-07-12


I mounted my 37" Vizio LCD with this mount and I'm very happy with the finished product. The installation is pretty straightforward and easy, but the built-in bubble level that's on the actual mount was a bit misleading. When I used it as a guide, the mount was a little off balance. Use the included magnetic bubble level for better results. If you have a 3 foot bubble level or a laser level, that would be even better.

It is extremely sturdy and it could easily accommodate something much heavier than my TV. I will probably order another one to mount my 55" Panasonic.